Saturday 3 March 2012

Lone Star day–post 3

Don’t forget you can Link with me here.


I've made another section, hung the washing out, brought the washing in cos it started raining, popped out to buy the mushrooms I forgot this morning, and now, here I am again.
I thought it was a good time for me to write down what I have learnt so far:
20120303_3Starch, starch, starch.  (I've also learnt that I loathe the smell of it!)




20120303_4Pin, pin, pin. I thought I'd try some of the double pronged pins, which I believed were just meant for this sort of thing, but quite honestly I found they were more trouble than they were worth.  I was probably using them incorrectly, but when I put them in, the fabrics seemed to shift a bit, so I was not getting the accuracy.

20120303_2The book I am sort of using, says to draw seam lines on all my strips to make for accurate matching.  It then says to pin, then to machine tack (baste to those of you in the US), check the accuracy, then either start again or machine the pieces.  I, in my infinite wisdom, decided that was total overkill, and that I could judge the seam allowance by eye, pin then sew.  After several unsatisfactory attempts, I rethought my strategy. 

20120303_1I now draw the seam allowance, pin through where that line crosses my stitching, check that the pin goes through the same cross on the underneath part, and sew, carefully and slowly.  Having these intersections marked has made the whole thing very much easier.


20120303_5Be careful when pressing, and remember I am pressing, not ironing, edges on the bias.  At first I pressed my seams to one side, but then I tried pressing them open as an experiment.  Although it's a fiddle, and has led to a few burnt fingers, I have found that it helps everything to lie flat and it also makes the points look lovely and pointy!  I did try using my little applique mini-iron to open the seams, but decided it was easier with my real iron.

6 comments:

  1. Thanks for sharing your learnings, they will come in handy. From past projects where I have worked with biased cuts, starch is a must otherwise you will end up with a wonky quilt.

    ReplyDelete
  2. You're using the same brand of starch I am and thankfully mine is getting low. I think perhaps if I change brands the smell will change too.

    ReplyDelete
  3. You sure give alot of useful tips....

    ReplyDelete
  4. I like the tip about drawing the seam line. I have been eyeballing it and pinning carefully and the points aren't too bad but could be better. I'll try pressing the seams open too!

    ReplyDelete
  5. It is really looking great and it is fun to read what you have learned along the way. It is a quilt on my "SOMEDAY" list.

    ReplyDelete
  6. I also read that you shouldn't use steam on those bias edges.

    PS...twin sister, or soul sister or whatever you are because we are so alike...I thought the same as you. I did not mark them and after frog stitching decided that marking them is a good idea.

    ReplyDelete

I love to receive your comments, so please do leave them and wherever possible I will reply to you by email.

09 10